Premium Elevator Systems

Introducing our latest innovation — Binks® premium elevator systems — providing a plug ‘n’ play elevator system configured to work out of the box, saving installation and assembly time.

The Binks® premium elevator systems are fully configurable, and assembled to your specifications, to meet the demands of any production installation. They utilize the Binks® range of pumps and agitators to offer the best fluid handling delivery system, and include a
host of operator and safety features. All Binks® elevators feature an anti-twist mechanism, and sturdy construction and they are designed for use with both solvent- and water-based materials.

They come with various hose management options (cable carrier, flexible conduit and coiled hoses), and lids contain cutouts and inspection hatches.  The elevators are Machinery- and ATEX-approved for use in Zones 1 and 2.

• Smooth speed-controlled operation reduces “bouncing and movement”
• Reinforced drum lid supplied dependent on configuration
• Elevator, agitator and pump controls in one place
• Flush push buttons prevent accidental operation
• Controls can be configured either left- or right-hand
• All models feature an anti-twist mechanism, sturdy construction and are designed for use with both solvent-based and waterborne materials
• Air inlet manifold is included as standard to allow quick connect and pre-installed air connection of agitator and pump which is accessible from either left- or right-hand side of elevator shaft

Safety Features

• Lockable inspection hatch to keep untrained operators away from the drum interior
• Safety interlocks automatically stop the pneumatic or electric agitator from operating when the drum lid is raised
• Concealed agitator interlock design prevents operator tampering without the correct tools
• Speed controller ensures a slow and controlled descent of the drum lid — whatever the weight!

CONTROLS

• Flush mounted up/down controls prevent accidental operation
• Controls can be configured right- or left-handed
• Elevator, agitator and pump controls in one place

Pump Options

DX200 1:1 DIAPHRAGM PUMP

• Aluminum or stainless steel
• Max fluid pressure 7 bar (100 psi)
• Continuous fluid delivery 5 L/min (1.25 gal/min)

DX200 3:1 DIAPHRAGM PUMP

• Stainless steel
• Max fluid pressure 21 bar (305 psi)
• Continuous fluid delivery 3.5 L/min (0.9 gal/min)

MAPLE 15/3 HORIZONTAL PISTON PUMP

• Stainless steel
• Max fluid pressure 21 bar (305 psi)
• Continuous fluid delivery 7.5 L/min (2 gal/min)

Pneumatic Agitator Options

25 L/5 GAL DIRECT DRIVE

• 80 mm (3″) diameter
• Standard shaft 343 mm (13.5″)
• Short shaft 305 mm (12″)

205 L/55 GAL DIRECT DRIVE

• Twin paddle
• Shaft 753 mm (29.6″)
• 150 mm/5.9″ diameter

205 L/55 GAL GEARED DRIVE

• IEC71 or NEMA 56C motor flange mount
• Twin paddle
• Standard or long-life motor
• Shaft 800 mm (31.5″)
• 200 mm (7.87″) diameter

Electric Agitator Options

25 L/5 GAL GEARED DRIVE

• IEC71 or NEMA 56C motor flange mount
• Shaft 400 mm (15.7″)
• 120 mm (4.7″) diameter

205 L/55 GAL GEARED DRIVE

• IEC71 or NEMA 56C motor flange mount
• Inverter driven or fixed speed
• Twin paddle
• Shaft 800 mm (31.5″)
• 200 mm (7.87″) diameter

Cable and Hose Management Options

• Single or double coiled hose 8 mm (1/8″)
• Single or double flexible hose conduit
• Cable carrier
• High and low mounting points

Pail Lid Configurations

• Blank or pre-drilled for a variety of equipment mounting options
• 25 L/5 gal or 205 L/55 gal lid sizes
• Lockable inspection hatch
• Reinforced for the weight of heavy equipment
• Available fitted with 1/4″, 3/8″ or 1″ suction tubes
• Option for 1/2″ return tube through lid